DIY Decor | "On Air" Box Pt 2

Tweet this!

Remember the story about the old school recording studio? The studio. The lounge. The velvety voice inside the studio. The visitors waiting to see that she's "On Air" and ready to sing them into oblivion.

To get that vibe, we couldn't order an On Air box online (like this one). It just wouldn't be right. We needed it to feel authentic and have meaning. We needed it to not look like it was mass-produced in a factory and shipped off to Target or Urban Outfitters. We needed to make it ourselves!

And with a trip to Home Depot, we were supplied and ready to rumble!

Just for good measure, before we begin, please keep your arms and legs inside the vehicle at all times. Kinda like our buddy Claude:

 

Step 1: Cutting (Check out Part 1 for the tutorial)

Step 2: Staining (Check out Part 1 for the tutorial)

Step 3: Painting

After staining the wood, we painted the back of the Acrylic Sheet with a thin red layer, applied with a cloth (why cloth? forgot to get a brush, so we improvised, and it worked!).

DIY Decor | Ampersand & Art

Tweet this!

Remember when we gave Justin's living room a makeover? Well, more to come on that (after more than a few changes-and-re-arranges and a thrift store shelving adventure)... but, for now, I'd like to announce: the decor has spread. To the bedroom.

You might remember that the living room was full of bold colors, of which red somehow became the favored child. Well, this room will turn out to be the calmer, softer brother. We've only just begun...



I’ve wanted to make Ampersand art for a while now but was semi stumped on how to do it in a unique way.

I considered painting an ampersand onto a large scrap of wood or canvas, but it felt very “done before” and never came to fruition.

Then, while walking the halls of Ace Hardware (my personal “Eureka” location), Justin and I found a large sheets of Acrylic Transparency. They’re about 1/4 an inch thick and are pretty amazing. Without a fully formulated plan, we grabbed it.

We ended up spray painting around the Ampersand, so that the “background” of the piece is blue, and the ampersand, itself, is see-through. That means we can swap out what we place behind the art, to fill in the ampersand with any fabric, magazine clipping, or page from a book that we choose.

I'm still pretty obsessed with the idea. Why? Because it will always match. We can put anything behind it and instantly change its color and effect on the room.

How'd we do it?

Start with a transparent acrylic sheet...



Use painters tape (masking tape) to cover the sheet. I had almost covered the entire sheet when I realized I only needed to cover areas which would be used by the "&" we printed out (as that was the only tape we would be leaving on the board).

Choose an ampersand (&) in Microsoft Word, enlarge it to your preferred size, and print. We tried a variety of fonts (really, we had a few pages worth of samples) but ended up going with good old Times New Roman. I was, at first, stern on my sans-serif stance and convinced we would be going with something smooth... but, as we checked out various samples, we decided that Times New Roman had something really classic about it. It reminds me of newspapers and journalism. And, in the end, it just felt like the right thing to do. We made it as large as we could and printed it out.

Cut loosely around the edges (so that there is still white space, and enough room for tape) and then tape onto the sheet where you would like the ampersand to show up.

Use an exacto knife to cut out the ampersand.

Remove the tape surrounding the ampersand. Do this slowly and have an exacto knife handy to do extra cutting in places you may have not fully cut.

Spraypaint the art (leaving the tape on). You'll need to do a number of layers in order to get a solid coat, because the background is see through. We did a whopping 6 layers of blue spraypaint before stopping.

Once the spraypaint has dried, slowly remove the ampersand tape. Use an exacto knife to help lift up the tape.

Choose any fabric, magazine, etc to tape behind the acrylic sheet and show through.

To hang, we hot glued a piece of metal "teeth" we yoinked off of the back of a picture frame.

Here are two final product shots:

And a few shots up-close-and-personal:

So yes, we'll admit, there is much to be done in this room... I'm working on four wall art pieces using silhouettes and some additional shelving... Get excited!

If you like it then you should have put a bird on it...

Tweet this!

Do I like real life birds?  Eh.  Not particularly.  I can take them or leave them.

Do I like cutting birds out of magazines? You betcha.

My dad purchased a canvas years ago and never used it.  So recently, on a whim, I decided to rescue it from project purgatory - how nice of me! Also, hello -- free canvas? Yes please.  But whatsagirltado with a blank canvas?  In this case, my answer began when a little birdy whispered in my ear (see what I did there?).  Suddenly I was cutting bird shapes out of magazines...

But I wanted more color.  Maybe I should have stopped there (I almost like it more in this simple form) but I was on a roll and simply could. not. stop.  So I taped up the canvas with random intersecting lines using painter's tape, found some acrylic paint, and went at the canvas with a sponge.